Use AC to coliimate 150HNTf2.8
Printed From: OHbaby!
Category: Dads
Forum Name: General Chat for Dads!
Forum Description: A place for Dad's to chat.
URL: https://www.ohbaby.co.nz/forum/forum_posts.asp?TID=53358
Printed Date: 27 November 2024 at 10:44am
Software Version: Web Wiz Forums 12.05 - http://www.webwizforums.com
Topic: Use AC to coliimate 150HNTf2.8
Posted By: Stephane267160
Subject: Use AC to coliimate 150HNTf2.8
Date Posted: 02 August 2021 at 6:04am
When I rotate AC 90 degrees, the original overlapped P and 2 are offset. What is the cause of this?
In addition, I have placed the AC as close to the focal plane as possible, and the reflective image cannot be exactly the same size as the yellow spot. . .
|
Replies:
Posted By: Sonia267533
Date Posted: 02 August 2021 at 12:05pm
|
We had this terrible heatwave last summer. It was steaming hot outside so the AC was working like 24/7. After a couple of days in such mode, it started to act up a little. The fan sometimes was suddenly on and the lights were blinking while I tried to change the mode. Besides, the temperature on AC was changing itself at night. I thought that it was broken and I started to get thoughts that we wouldn`t survive the heat without AC. Luckily, I found a guide on eliminating my problem on https://www.marvellous.sg/aircon-light-is-blinking/" rel="nofollow - https://www.marvellous.sg/aircon-light-is-blinking/ . It turned out that the aircon was overworked because of the filth in its filter. I immediately cleaned it and the problem was solved.
|
|